Netgear AC1200 Setup using mywifiext

 

Using the Netgear AC1200 WiFi range extender setup to get ultra-high-speed internet connections. The Netgear AC1200 Setup provides you with quick WiFi output with up to 1200Mbps bandwidth with AC dual-band WiFi. It is compatible with almost all wireless routers that are standard. The system uses frequency bands of 2.4 GHz and 5 GHz to connect to your current WiFi network and expand the signal to a greater distance. 

A FastLane link to your current router or WiFi modem is provided by this Netgear WiFi range extender. This dedicated access, unlike other standard WiFi extenders, increases the current internet speed and improves the overall efficiency of the WiFi network. 

WiFi Range Extender Setup for Netgear AC1200 Using WPS Push Button 

Did you find the setup process above a little troublesome for you? Don't worry! For you, we've got another way. For the Netgear AC1200 setup, use the

mywifiext WPS (WiFi Safe Setup) command. Here's how to set up an AC1200 extender for Netgear using WPS: 

• Place and switch on your AC1200 extender at an optimum spot. 

• Now, click on it with the WPS button. 

• You'll note that the LED WPS light is beginning to blink. It means that with the current router, the extender is being programmed. 

• After some time, your extender will have three strong green lights on it. It indicates that the configuration process between the router and your extender has been completed. 

• Connect with our experts via mywifiext.local, if you do not see any LED lights on your Netgear extender. 

• If your router offers support for the 5 GHz band, repeat the above steps once you link the Netgear extender Setup to the 5 GHz band. 

• Once done, unplug and put the extender anywhere in the house you want.